HOME

PRODUCTS

ORDER ONLINE

DISTRIBUTORS

CONTACT INFO

CUSTOMER CARS

INSTALLATION INSTRUCTIONS

FAQ'S

DISCLAIMER

PRESS RELEASES

 

 

 

1996-2006 General Motors W-Body
(Pontiac Grand Prix, Chevrolet Monte Carlo, Buick Regal, Oldsmobile Intrigue)
  Click to see a larger image
 

The W-Body rear suspension is marginal at best when it comes to aggressive driving. The factory uses small diameter tubing on the lateral links and formed sheet metal for the trailing arms. When subjected to higher loads than Grandmas typical driving, they tend to flex, producing unpredictable handling characteristics. BMR tubular lateral arms and trailing arms increase the suspensions reaction times and promote improved consistency throughout the driving experience.


Rear Suspension Arms

Lateral Arms - rear mount
Lateral Arms - forward mount
Trailing Arms
BMR adjustable lateral arms replace the factory 3/4" diameter arm with a heavy duty, 1.25" diameter tubular unit. The large 3/4" adjuster allows "on-car" adjustment in an accessible location. The OE rear mount lateral bars are not adjustable from the factory but the BMR replacements provide additional caster adjustment that was not possible with a fixed length arm. The BMR tubular trailing arms replace the factory stamped, u-shaped trailing arm with a 1.5" diameter tubular upgrade. All arms come standard with low deflection, fluted polyurethane bushings equipped with grease fittings. Available in Black Hammertone or red powdercoat.
Part #TCA011 Tubular trailing arms
$129.95 pr
Part #TCA012 Adjustable Lateral Arms - forward mount
$209.95 pr
Part #TCA013 Adjustable Lateral Arms - rearward mount
$209.95 pr
Kit #WPKG001 All of the above - Save $40
$509 set

 
Click to see a larger image
STRUT TOWER BRACES
BMR strut tower braces will increase the handling capabilities of your Grand Prix by eliminating strut tower deflection and increasing chassis rigidity. BMR provides the strongest braces by far in the market as shown in the images below. Built with 1/4" wall thickness 1-1/8" CNC machined aluminum tube and laser cut 3/16" steel mounting plates, you can be sure that quality and strength has not been compromised. Available in Black Hammertone or red powdercoat.'97-04 models only. NOTE: rear strut tower brace will not fit '04 models.
STB005 Front Strut tower brace - 1997-2004 W-Body
$145.95
STB006 Rear Strut tower brace - 1997-2003 W-Body
$145.95
STBK001 Front and Rear braces - 1997-2003 W-Body - Save Over $10
$279
 

 

PACKAGE PRICING

Complete kit including front and rear Strut Tower Braces and all 3 pairs of rear suspension arms - Save Over $60

CP010 - $779

 

 


FEATURE CARS
 Click Picture Above
RELATED SITES

LS1.COM:
 F-Body and Y-Body
 FAQ's and Forums

LS1TECH.COM:
 F-Body and Y-Body
 FAQ's and Forums

F-BODY.COM:
F-Body
FAQ'S and Forums

FBODY.COM:
F-Body
FAQ's and Forums
B-BODY.NET:
International B-Body Association
FAQ's, Tech and Forums
G-BODY.ORG:
G-Body
FAQ's, Tech and Forums
GNTTYPE.ORG:
 Turbo Regal
 FAQ's, Tech and Forums
CLUBGP.COM:
W-Body
FAQ's, Tech and Forum

 
 
 
 
 

 

[Main Page] [About] [Distributors] [FAQ's] [Links] [Installation] [Contact Info]

1