|
|
 |
|
Want
to launch like this? This
car cuts 1.32 60 ft/times using only BMR Xtreme Duty Products,
QA1 shocks and 9" slicks!!
Whether
you are building an 8 Second racecar or a bulletproof streetcar,
these products are built to take whatever you can give them!
|
|
|
Click
picture for larger image
|
|
|
Intended for cars running
ET's below 10.50's, this bulletproof torque arm will survive
anything you can throw at it. Constructed entirely from
TIG welded 1.25" x .095" 4130 chrome moly tubing.
Additional features include:
|
|
Comes complete with a magnetic anglefinder,
weld-up driveshaft safety loop and an extra long 1-5/8"
DOM cut to fit crossbrace that welds directly to your
subframe connectors. If you are looking for a torque arm
to stand up to that 8, 9, or 10 second motor, look no
further - this is the arm for you! Available in Black
Hammertone or red powdercoat.
Part
#XTA001 - '82-2002 F-Body $659.95
|
IMPORTANT NOTICE TO MOSER 12
BOLT USERS: This product is only warrantable on rear axles
that utilize the factory style "through bolts" to connect
the torque arm to the rear end. Moser 12 bolt rear ends utilize
a threaded bolt hole that has been proven to have bolt retention
issues when used with aftermarket torque arms. If you have this
particular rear axle, understand this warranty disclaimer and
still wish to use this product, keep in mind that lock washers,
or Loctite brand thread sealants are not substitutes for periodic
bolt inspection.
Dragrace Rear Anti-Roll Bar
|
Click
picture above for a larger image
|
|
Having problems getting your 9 or 10 second
car to hook up? Tired of leaving the line sideways? Rear
anti-roll bars have been proven to eliminate torque steer
and body roll during hard launches and will drastically
improve the cars consistency as well as stability going
down the track. Because this anti-roll bar is patterned
after the stock bar, it will work
with any stock or aftermarket rear end housing and
will clear all aftermarket exhaust and suspension components.
This bar has already seen a 1.28 60 ft/time and is begging
for someone to go quicker! Available in Black
Hammertone or red powdercoat.
|
|
- Heavy duty 3/16" mounting plates
for rearend and frame
- Massive 1.25" solid anti-roll
bar
- Overkill 5/8" chrome moly rod-ends(most
kits use either 3/8" or 1/2")
- Prothane bushings, silicone grease,
and Grade 8 hardware included
|
| Part #XSB001 |
'82-2002
F-Body with 3"-3.25" axle tubes |
$449.95 |
| Part #XSB002 |
'82-2002
F-Body with 2.5"-2.75" axle tubes |
$449.95 |
| These bulletproof control arms
are made from 4130 chrome moly tubing and feature overkill
sized 1-1/8" double adjusters. Arms are adjustable in
length up to 1". Perfect control arm to compliment your
other Xtreme Duty BMR products. Available in Black
Hammertone or red powdercoat. |
Part
#XCA001 - $288.95
|
| Yes, that's right, an Xtreme
shocktower brace! For those of you that just have to have
the biggest and best, we offer this heavy duty, 1-5/8"
shocktower brace. This brace is a direct bolt-in just as our
regular brace is yet it is made from .083" wall NHRA
legal chrome moly rollcage tubing. The strongest brace available,
period! Available in Black
Hammertone or red powdercoat. |
|
Part #XSTB001 - 1993-2002 V8 all
- $179.95
Note: Will
not fit 1993-1997 SS or 1993-2002 V6
|
|
|
